Cisco Cisco Aironet 602 OfficeExtend Access Point Guida All'Installazione
6
6
Understanding Cisco Aironet 600 Series OfficeExtend AP LEDs
7
Troubleshooting
For information on troubleshooting problems with your 600 Series OfficeExtend Access Point, refer to the Cisco Aironet 600
Series OfficeExtend Access Point User Guide.
Series OfficeExtend Access Point User Guide.
Status LED
Meaning
Purple
Association status, when CAPWAP is connected: Normal
operating condition, but no wireless client associated.
operating condition, but no wireless client associated.
Blue
Association status, when CAPWAP is connected: Normal
operating condition, at least one wireless client association.
operating condition, at least one wireless client association.
Flashing blue
Operating Status: Software upgrade in progress.
Flashing orange
Operating Status: No IP address, waiting for DHCP IP.
Cycling through purple,
orange and blue
orange and blue
Operating Status: Discovery/join process in progress, no client
associated.
associated.
Cycling through purple,
orange
orange
Operating Status: Discovery/join process in progress, with
client associated.
client associated.
Orange
Cisco IOS errors: Software failure; try disconnecting and
reconnecting unit power.
reconnecting unit power.
Others LEDs
Meaning
Local Ethernet LEDs
1 to 3
1 to 3
Since the Ethernet ports are gigabit ports, each LED lights up
green when the port is connected to a gigabit port and blue
when the port is connected to a 10/100 port. The LED is off if
there are no devices connected to the Ethernet ports.
green when the port is connected to a gigabit port and blue
when the port is connected to a 10/100 port. The LED is off if
there are no devices connected to the Ethernet ports.
The LED is solidly lit when the router is connected to a device
through that port. It flashes to indicate network activity.
through that port. It flashes to indicate network activity.
Remote LAN LED
This LED is active when a device is connected to the LAN
port.
port.
Wireless LED
The Wireless LED lights up when the wireless feature is
enabled. If the LED is flashing, the AP is actively sending or
receiving data over the network.
enabled. If the LED is flashing, the AP is actively sending or
receiving data over the network.
WAN LED
This LED is active when a device is connected to the WAN
port.
port.
USB LED
This LED is disabled and is planned for future support.
Power Indicator LED
The Power LED lights up and will remain steady while the AP
is powered on. When the AP goes through the boot-up
process, this LED will flash. When the boot-up process is
completed, the LED will be solidly lit.
is powered on. When the AP goes through the boot-up
process, this LED will flash. When the boot-up process is
completed, the LED will be solidly lit.