Cisco Cisco Aironet 602 OfficeExtend Access Point 설치 가이드

For information on troubleshooting problems with your 600 Series OfficeExtend Access Point, refer to the Cisco Aironet 600 
Series OfficeExtend Access Point User Guide. 

Purple

Association status, when CAPWAP is connected: Normal 
operating condition, but no wireless client associated.

Blue

Association status, when CAPWAP is connected: Normal 
operating condition, at least one wireless client association.

Flashing blue

Operating Status: Software upgrade in progress.

Flashing orange

Operating Status: No IP address, waiting for DHCP IP.

Cycling through purple, 
orange and blue

Operating Status: Discovery/join process in progress, no client 
associated.

Cycling through purple, 
orange

Operating Status: Discovery/join process in progress, with 
client associated. 

Orange

Cisco IOS errors: Software failure; try disconnecting and 
reconnecting unit power.

Local Ethernet LEDs
1 to 3

Since the Ethernet ports are gigabit ports, each LED lights up 
green when the port is connected to a gigabit port and blue 
when the port is connected to a 10/100 port. The LED is off if 
there are no devices connected to the Ethernet ports.

The LED is solidly lit when the router is connected to a device 
through that port. It flashes to indicate network activity.

Remote LAN LED

This LED is active when a device is connected to the LAN 
port.

Wireless LED

The Wireless LED lights up when the wireless feature is 
enabled. If the LED is flashing, the AP is actively sending or 
receiving data over the network.

WAN LED

This LED is active when a device is connected to the WAN 
port.

USB LED

This LED is disabled and is planned for future support.

Power Indicator LED

The Power LED lights up and will remain steady while the AP 
is powered on. When the AP goes through the boot-up 
process, this LED will flash. When the boot-up process is 
completed, the LED will be solidly lit.