Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
35
Configuring GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards Using PCLI
OL-25022-01
DLP- G651 Configure Preemption Delay on the Primary Edge Port Using PCLI
DLP-G651 Configure Preemption Delay on the Primary Edge Port Using PCLI
Step 1
Complete the following tasks, as needed:
Step 4
rep stcn interface id
Example:
MSTP 176 (config-if)# rep stcn
interface 10
Configures a edge port to send REP STCNs to a specific interface.
Step 5
exit
Example:
MSTP-176(config-if)# exit
Exits interface configuration mode.
Stop. You have completed this procedure.
—
Purpose
This procedure explains how to configure preemption time delay on a
primary edge port using PCLI.
primary edge port using PCLI.
Tools/Equipment
None
Prerequisite Procedures
Required/As Needed
As needed
Onsite/Remote
Onsite or remote
Security Level
Provisioning or higher
Command or Action
Purpose
Step 1
configure terminal
Example:
MSTP 176# configure terminal
Enters global configuration mode.
Step 2
interface type port
Example:
MSTP 176# (config) interface giga 1
MSTP-176# (config-if)#
Enters interface configuration mode.
Step 3
rep preempt delay seconds
Example:
MSTP 176 (config-if)# rep preempt delay
100
Configures preemption time delay of 100 seconds on the primary
edge port.
edge port.
Step 4
exit
Example:
MSTP-176(config-if)# exit
Exits interface configuration mode.
Stop. You have completed this procedure.
—
Command or Action
Purpose