Cisco Cisco Prime Optical 9.6 Riferimenti tecnici
42
Cisco Prime Optical 9.6 ML Provisioning Methodology
OL-27085-01
IP Service-Level Agreement on ML-Series Cards
Note
Performance monitoring is disabled for the IP SLA echo operation. If you select an echo row
in the IP SLA performance monitoring (PM) table, the Performance menu is disabled.
in the IP SLA performance monitoring (PM) table, the Performance menu is disabled.
3. Manage the IP SLA Session
To begin collecting, enable the IP SLA session. The operation ends after 3600 seconds, but you can
restart it from the Restart IP SLA menu.
restart it from the Restart IP SLA menu.
Use the IP SLA table (see
) to enable, restart, and delete IP SLA.
Figure 22
IP SLA Table
Use the following commands to enable, restart, and delete IP SLA:
Enable IP SLA
rtr schedule IPSLA ID start-time now
[IP SLA Number range is from 1 to 2147483647]
Restart IP SLA
rtr restart IPSLA ID
[IP SLA Number range is from 1 to 2147483647]
Delete IP SLA
No rtr IPSLA ID
[IP SLA Number range is from 1 to 2147483647]
Note
The MIB uses SNMP to retrieve PM statistics on IP SLA.