Cisco PowerKEY CableCARD Module 805 Guida All'Installazione
Appendix C
Provision the PCG
90
78-4017672-01 Rev E
explicitly administered on the DNCS/ISDS source definition GUI for the
associated service or program. Access criteria can be configured through the
ACMC; to set up the ACMC/Scrambling control task and the SCS Configurator,
see Continuum DVP - D9600 DVB Scrambling User's Guide (part number 4009598).
associated service or program. Access criteria can be configured through the
ACMC; to set up the ACMC/Scrambling control task and the SCS Configurator,
see Continuum DVP - D9600 DVB Scrambling User's Guide (part number 4009598).
4 A single channel over a TCP connection serves multiple programs. When a
program is scheduled for scrambling, the SCS sets up a stream for the program.
The scrambler issues access criteria and control words to the PCG for the session,
and the PCG responds with the ECMs.
The scrambler issues access criteria and control words to the PCG for the session,
and the PCG responds with the ECMs.
5 The SCS then sends the ECMs and the scrambled program (with the
corresponding control word) to the built-in modulator. From there it goes to the
RF and then to the set-top.
Note: If the PCG communicates with an SCS device that does not have a built-in
modulator then a separate modulator will be needed to provide RF modulation.
RF and then to the set-top.
Note: If the PCG communicates with an SCS device that does not have a built-in
modulator then a separate modulator will be needed to provide RF modulation.