Cisco Cisco Content Delivery Engine 250 Guida All'Installazione

 
 

utility and associated firmware image onto the USB DOS stick.     
 
-  For VDS-TV these are contained in the ipmi303.zip downloaded from the “Download 

Link for IPMI FW v3.03 for VDS-TV Application” link contained in FN #63883: 

a)  Unzip ipmi303.zip to a temporary folder. 
b)  Copy the contents of the ipmi303/ directory to the root of the USB DOS stick. 

   

-  For VDS-IS these are contained in the vdsis-ipmi303.zip downloaded from the 

“Download Link for IPMI FW v3.03 for VDS-IS Application” link contained in 
FN#63883: 

a)  Unzip vdsis-ipmi303.zip to a temporary folder. 
b)  Copy the contents of the vdsis-ipmi303/ directory to the root of the USB DOS 

stick. 

-  For VQE these are contained in the IPMI303.zip downloaded from the “Download Link 

for IPMI FW v3.03 for VDS-IS Application” link contained in FN#63883: 

a)  Unzip IPMI303.zip to a temporary folder. 
b)  Copy the contents of the IPMI303/ directory to the root of the USB DOS stick. 

 
3)  Remove the USB DOS stick, and insert into any of the available USB ports on the back of 

the CDE250. 

 
4)  Connect a monitor and keyboard or KVM to the back of the CDE250. 
  
5)  Boot to the USB DOS stick. 
      To accomplish this, simply reboot the CDE250; it should automatically  
      boot to the USB DOS stick. 
 

(All CDE250 systems are pre-configured at the factory to first boot to external USB devices, 
followed by the internal compact flash.   If the system doesn’t automatically boot to the USB 
DOS stick, please verify the boot device priority in the BIOS.)    

  
6)  After the system boots into a DOS prompt, initiate the IPMI firmware upgrade by executing 

the IPMIUP.BAT DOS batch file. 

 

C:\> IPMIUP.bat 
 
The following will be displayed: 
 
Update IPMI FW to v3.03 
Current and proposed IPMI BIOS update versions 
… etc … 

 

Updating the IPMI FW to v3.03 
… etc … 

 
      The entire firmware upgrade should take approximately 10 minutes to complete.