Cisco Cisco Content Delivery Engine 250 Guida All'Installazione

2.3.2 Validation on CDS-TV

Verify the IPMI FW using the following command:

CDE250_Streamer# cat /sys/devices/platform/ipmi_bmc.aabb.32/firmware_revision
This should return “3.9”

Note: Linux will usually strip the “0” from the 3.09 string.

Execute the “sdt” CLI command. Verify this command does not hang (example output is
shown below):

CDE250_Streamer# sdt

*****************************************************************************
SuperDoctor II - Linux version 2.111(140922)
Copyright(c) 1993-2014 by Super Micro Computer, Inc. http://supermicro.com/
*****************************************************************************
Monitored Item High Limit Low Limit Status
----------------------------------------------------------------------
Fan1 Fan Speed 715 7031
Fan7 Fan Speed 715 5625
Power1 Fan 1 Speed 4007 7786
Power1 Fan 2 Speed 4007 12251
Power2 Fan 1 Speed    4007 8129
Power2 Fan 2 Speed 4007 12137
CPU1 Vcore Voltage 1.49 0.60 1.06
CPU2 Vcore Voltage 1.49 0.60 1.20
CPU1 VTT Voltage 1.34   0.92 1.13
CPU2 VTT Voltage 1.65 0.92 1.13
CPU1 DIMM Voltage 1.65 1.20 1.36
CPU2 DIMM Voltage 1.65 1.20 1.37
+1.5V Voltage 1.65 1.35 1.45
+1.8V Voltage 1.98 1.62 1.78
+5V Voltage 5.50 4.51 5.02
+12V Voltage 13.19 10.80 12.13
+1.1V Voltage 1.21 0.98 1.10
+3.3V Voltage    3.65 2.95 3.29
+3.3Vsb Voltage 3.65 2.95 3.24
VBAT Voltage 3.65 2.95 3.00
CPU1 Temperature 95/203 Low
CPU2 Temperature 95/203       Low
System Temperature 75/167 37/98
Power1 Temperature 80/176 37/98
Power2 Temperature 80/176 38/100
Chassis Intrusion Good
Power Supply Failure Good
Power1 Supply Failure Good
Power2 Supply Failure Good
--------------------------------------------- Fri Mar 20 13:08:12 2016