Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Guida All'Installazione
4
4030265 Rev B
Equipment and Tools Needed
Equipment and Tools Needed
The GainMaker Node Mains Power Pack Kit, part number 4029111, includes an
external AC-to-DC power supply, a power inserter/filter, a bracket for mounting the
node to a wall or 19-inch rack, and interconnecting hardware.
The following table lists the complete contents of the kit.
The following table lists the complete contents of the kit.
Description
Part Number
Quantity
GainMaker Node Wall Mount Bracket
4029113
1
External Power Supply
4029112
1
External Power Supply Bracket
4029114
1
Power Inserter/Filter, with mounting plate and cable guide 4029115
1
Power Cord, North American IEC
562389
1
Housing Input Connector
172592
1
Cable Tie
73045
2
F Male to F Male Adaptor
1010453
2
Before you begin, confirm that the kit contains all of the parts listed above.
Tools Required
Before you begin, make sure that you have the following tools:
3/4-inch open end wrench
3/8-inch open end wrench or other F-connector tool
1/2-inch nut driver
Additional Equipment Needed
In addition to the parts supplied with the kit, you will need to obtain the following:
In addition to the parts supplied with the kit, you will need to obtain the following:
Appropriate size #8 mounting hardware for the node housing and power
inserter/filter module
For installations not in North America, an IEC power cord for the region of use
Grounding wires as needed for the node and power inserter/filter module
housings