Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Guida All'Installazione
4030265 Rev B
5
To Install the Housing Input Connector
To Install the Housing Input Connector
Complete the following steps to install the housing input connector in the
GainMaker node housing.
1 Open the node housing.
2 Remove the RF module.
3 Loosen the seizure.
4 Install the housing input connector.
5 Tighten the housing input connector from 5 ft-lb to 8 ft-lb (6.8 Nm to 10.8 Nm).
6 Re-tighten the seizure.
1 Open the node housing.
2 Remove the RF module.
3 Loosen the seizure.
4 Install the housing input connector.
5 Tighten the housing input connector from 5 ft-lb to 8 ft-lb (6.8 Nm to 10.8 Nm).
6 Re-tighten the seizure.