Cisco GainMaker Reverse Segmentable Node - 1GHz with 40 52 MHz Split Riferimenti tecnici
1 GHz GainMaker
Broadband Amplifier Platform
Housing Strand Clamp Offset Bracket
Technical Bulletin
Broadband Amplifier Platform
Housing Strand Clamp Offset Bracket
Technical Bulletin
Overview
Some installations require that a GainMaker
®
node or system amplifier housing be
mounted directly to a system strand cable without interfering with other service
cables attached to the strand.
In such installations, an offset strand clamp bracket (not supplied with the
In such installations, an offset strand clamp bracket (not supplied with the
housing) can be used to lower the mounting position of the GainMaker node or
system amplifier housing. The customer-selected offset mounting bracket permits
other service cables to pass between the strand cable and the housing, thereby
avoiding interference.
Purpose
This document provides customers with important installation information when
using customer-selected offset strand clamp brackets to mount a GainMaker node
or system amplifier housing.
Audience
This document is intended for authorized service personnel who have experience
working with similar equipment. The service personnel should have appropriate
background and knowledge to complete the procedures described in this
document.
Qualified Personnel
Only appropriately qualified and skilled service personnel should attempt to
install, operate, maintain, and service this product.
WARNING:
Allow only qualified and skilled personnel to install, operate, maintain, and
Allow only qualified and skilled personnel to install, operate, maintain, and
service this product. Otherwise, personal injury or equipment damage may
occur.