Cisco Headend System Release 2.7 Guida Utente
Chapter 4 Generating Reports
20
4013430 Rev B
4 Does the following message appear on the screen?
This report has not yet been generated on your system. Please press the back
button on your browser to return to the SNMP page.
button on your browser to return to the SNMP page.
If yes, click Back to return to the SNMP Poll Reports page.
If no, click Run Report to generate all of the SNMP Poll Reports.
Important: The SNMP Poll Reports can take a significant amount of time to
complete, depending on the number of DHCTs in the system. While the SNMP
Poll Reports are being generated, do not exit your Web browser. Exiting the Web
browser while the reports are being generated can cause errors in the Report
Writer software that will require some manual clean-up steps (see
Troubleshooting Guidelines and Solutions on page 23). It is also recommended
that you do not click anywhere in your Web browser until the SNMP Poll
Reports are completely generated.
Notes:
complete, depending on the number of DHCTs in the system. While the SNMP
Poll Reports are being generated, do not exit your Web browser. Exiting the Web
browser while the reports are being generated can cause errors in the Report
Writer software that will require some manual clean-up steps (see
Troubleshooting Guidelines and Solutions on page 23). It is also recommended
that you do not click anywhere in your Web browser until the SNMP Poll
Reports are completely generated.
Notes:
While the reports are being generated, the following message appears:
Running <report name>. Please wait.
Running <report name>. Please wait.
Concurrently, a table appears on the screen, and as each SNMP Poll report is
generated, its status is updated from “working” to “complete.”
generated, its status is updated from “working” to “complete.”
5 When all the SNMP Poll reports are generated, click the Web browser Back
button.
6 Click the hyperlink for a specific SNMP Poll Report.
7 Does the report appear on the screen?
7 Does the report appear on the screen?
If yes, you have completed this procedure and all of the SNMP Poll Reports
have been generated.
have been generated.
If no, repeat this procedure beginning with step 1.
Descriptions
The SNMP Poll Reports collect data by issuing up to three SNMP poll requests to
each candidate DHCT. The term candidate DHCTs refers to DHCTs in the DNCS
database that have an associated MAC address, IP address, QPSK Modulator, and
QPSK Demodulator, along with an administrative status of In Service-Two Way. If a
DHCT listed in the DNCS database does not meet all of these criteria, it will be
excluded from the SNMP Poll Report. The SNMP poll request determines the
current two-way communication ability of each DHCT.
each candidate DHCT. The term candidate DHCTs refers to DHCTs in the DNCS
database that have an associated MAC address, IP address, QPSK Modulator, and
QPSK Demodulator, along with an administrative status of In Service-Two Way. If a
DHCT listed in the DNCS database does not meet all of these criteria, it will be
excluded from the SNMP Poll Report. The SNMP poll request determines the
current two-way communication ability of each DHCT.
When the SNMP Poll Report is run, each candidate DHCT is polled (this is also
called an SNMP "get" request). This SNMP poll collects all of the data necessary for
generating the four SNMP Poll reports. The SNMP Poll reports are different views
into the data collected.
called an SNMP "get" request). This SNMP poll collects all of the data necessary for
generating the four SNMP Poll reports. The SNMP Poll reports are different views
into the data collected.