Cisco Headend System Release 2.7 Guida All'Installazione
Download Software to the GQAM Modulators
4022900 Rev C
31
4 Click File and then select Reset. The Question window opens and asks you to
confirm the reset of the GQAM.
5 Click Yes. The QAM List window displays the following message:
The reset request has been received by QAM modulator <Name of GQAM>
Notes:
Notes:
The <Name of GQAM> represents the name of the modulator you just reset.
It may take up to 8 minutes for each modulator to reset.
6 Do you see the IP address for the GQAM you reset in the bootpd log file?
If yes, continue with this procedure.
If no, call Cisco Services.
Note: For details about IP addresses in the bootpd log file, go to
Preparing to
Monitor Remote GQAM Resets (on page 30).
7 Repeat steps 3 through 6 for up to three additional modulators, and then go to
step 8.
Important: Never reset more than four modulators at once, or you may cause
Important: Never reset more than four modulators at once, or you may cause
GQAMs to have to retry downloads due to traffic congestion on the network.
8 Choose one of the following options and then come go to step 9 of this
procedure.
For GQAM modulators that carry broadcast sessions, go to Verifying the
Functionality of GQAM Modulators That Carry Broadcast Sessions
(on page 35).
For GQAM modulators that carry xOD or VOD sessions, go to Verifying the
Functionality of GQAM Modulators That Carry xOD or VOD Sessions
(on page 36).