Cisco Headend System Release 2.7 Guida All'Installazione
Chapter 1 Initial Installation of RNCS Software
28
78-4021167-01 Rev D
4 Change or add the RNCS hostname to the file.
Note: The hostname should be the same hostname that you entered in step 10 of
Install the RNCS Software (on page 11).
Example: If your RNCS hostname is lionn2, you should add the following to this
Example: If your RNCS hostname is lionn2, you should add the following to this
file:
lionn2
5 Save and close the file.
Editing the /etc/defaultrouter File
Complete the following steps to update the /etc/defaultrouter File.
1 If necessary, log on to the RNCS as root user.
2 Type cat /etc/defaultrouter and press Enter. The /etc/defaultrouter file opens
1 If necessary, log on to the RNCS as root user.
2 Type cat /etc/defaultrouter and press Enter. The /etc/defaultrouter file opens
for inspection.
3 Does an entry already exist that contains the correct IP address of the Headend
Control Network Router?
If yes, go to Editing the /export/home/informix/etc/sqlhosts File (on page 28).
If no, open the /etc/defaultrouter file in a text editor.
4 Add or change the entry so that it contains the correct IP address of the Headend
Control Network Router.
Example: Your entry should look similar to the following example:
Example: Your entry should look similar to the following example:
10.253.0.254
5 Save and close the file.
Editing the /export/home/informix/etc/sqlhosts File
1 If necessary, log on to the RNCS as root user.
2 Type cat /export/home/informix/etc/sqlhosts and press Enter. The
2 Type cat /export/home/informix/etc/sqlhosts and press Enter. The
/export/home/informix/etc/sqlhosts opens for examination.
3 Does the file contain the hostname of the RNCS?
If yes, go to Enabling the FTP Service on the RNCS (on page 29).
If no, open the /export/home/informix/etc/sqlhosts file in a text editor.