Cisco Headend System Release 2.7 Guida Alla Risoluzione Dei Problemi
Configure the Remote RCS Site for EAS
4024428 Rev B
35
Verifying the /export/home/easftp Directory
Follow these steps to verify that the /export/home/easftp directory exists on the
Follow these steps to verify that the /export/home/easftp directory exists on the
RNCS.
1 Open an xterm window on the ISDS.
2 Type siteCmd [name of remote site] ls -l /export/home/easftp and press Enter.
1 Open an xterm window on the ISDS.
2 Type siteCmd [name of remote site] ls -l /export/home/easftp and press Enter.
The /export/home/easftp directory becomes the working directory.
Note: Do not type the brackets [ ] in the command.
Note: Do not type the brackets [ ] in the command.
3 Does an error message similar to Directory not found appear?
If no, the /export/home/easftp directory exists. You have completed this
procedure.
If yes, go to step 4.
4 Type siteCmd [name of remote site] mkdir /export/home/easftp and press Enter
to create the directory.
5 Type siteCmd [name of remote site] chown easftp dncs /export/home/easftp
and press Enter to set the ownership of the directory.
Determining the IP Address of the Remote ISDS
Follow these instructions to determine and record the IP address of the remote ISDS.
1 Log on to the ISDS as dncs user.
2 Open an xterm window on the ISDS.
3 Type siteCmd [name of remote site] more /etc/hosts and press Enter.
Follow these instructions to determine and record the IP address of the remote ISDS.
1 Log on to the ISDS as dncs user.
2 Open an xterm window on the ISDS.
3 Type siteCmd [name of remote site] more /etc/hosts and press Enter.
Note: Do not type the brackets [ ] in the command.
Result: A message similar to the following appears:
Result: A message similar to the following appears:
Working directory is /dvs/lionn
Database is lionndb
Site ID=2 IPAddr=10.202.0.1
Internet host table
127.0.0.1 localhost
10.202.0.1 lionn2 loghost
10.253.0.1 dncsatm
4 Locate the line that contains lionn.
Example:
10.202.0.1 lionn2 loghost
5 Record the IP address associated with lionn in the space provided:
_______________________________
6 Type exit and press Enter to close the xterm window.