Cisco DNCS System Release 2.7 3.7 4.2 Guida All'Installazione
Test dbSync on the DTACS Server
OL-31613-01
93
Test dbSync on the DTACS Server
Important: All steps in this procedure take place in the root remote terminal window
of the DTACS server.
of the DTACS server.
Complete the following procedure to ensure that the DTACS database successfully
syncs with the DNCS database:
1 In the root remote terminal window of the DTACS server, type the following
syncs with the DNCS database:
1 In the root remote terminal window of the DTACS server, type the following
command and press Enter to switch to the dncs user:
sux – dncs
2 Type the following command and press Enter to establish the correct DTACS
environment:
. /dvs/dtacs/bin/dtacsSetup
Note: Make sure there is a space between the period (.) and the forward slash (/).
3 Type the following command and press Enter to verify that you can access the
DNCS database:
dbaccess dncsdb@dncsatmDbServer -
Example: Output should be similar to the following example:
$ dbaccess dncsdb@dncsatmDbServer -
Database selected
>
4 Press the Ctrl and c keys simultaneously to exit from the dbaccess utility.
5 Type the following command and press Enter to initiate a synchronization of the
5 Type the following command and press Enter to initiate a synchronization of the
DTACS database:
dtacsdbsync –S
6 Did a Dbsync Succeeded message appear at the end of the script?
If yes, the synchronization was successful. Go to step 7.
If no, contact Cisco Services for assistance.
7 Click the Sys Config button on the Web UI console. The DTA Control System
Configuration window opens.
8 Click Sync Db to initiate the DTACS database synchronization process.
9
9
Did a DB Sync request processed successfully message appear?
If yes, the synchronization was successful.
If no, contact Cisco Services for assistance.