Cisco DNCS System Release 2.7 3.7 4.2 Guida All'Installazione
Chapter 5 SR 7.0 Post Upgrade Procedures
56
OL-31613-01
Session 10: 00:00:00:00:00:02/20
Session 11: 00:00:00:00:00:02/22
Session 12: 00:00:00:00:00:02/199
24 Does the Session Count total equal the number of sessions you recorded in the
Check the Number of BFS Sessions procedure?
If yes, continue with step 31.
If no, contact Cisco Services for assistance.
25 Telnet to the GQAM modulator where BFS sessions are built.
Example:
telnet 192.0.2.30
Note: Enter the login ID and password for the GQAM. If you make a typing
error, follow these steps to recover.
a Press the Ctrl and ] keys simultaneously to return to the telnet prompt.
b Type mode ch and press Enter twice.
error, follow these steps to recover.
a Press the Ctrl and ] keys simultaneously to return to the telnet prompt.
b Type mode ch and press Enter twice.
26 Type the following command and press Enter. The system opens the sessions
that are set up on the GQAM port.
print_session_status <port number>
Note: Port numbers on the GQAM are 0-15. If your sessions are built on port 16
in the QAM WUI, it will be port 15 on the GQAM.
in the QAM WUI, it will be port 15 on the GQAM.
27 Locate Session ID 00:00:00:00:00:00:2. Is this session in the
CREATE_TABMAN_WAITING state?
If yes, go to step 28.
If no, troubleshoot this matter using your established escalation procedures.
Note: Call Cisco Services if you are unable to resolve the issue.
Note: Call Cisco Services if you are unable to resolve the issue.
28 Does the Program State field of Session ID 00:00:00:00:00:00:2 show
PAT_ASSEMBLY?
If yes, go to the next procedure in this chapter.
If no, troubleshoot this matter using your established escalation procedures.
Note: Call Cisco Services if you are unable to resolve the issue.
Note: Call Cisco Services if you are unable to resolve the issue.