Cisco Cisco RF Gateway 1
Chapter 2 RF Gateway 1 Configuration Quick Start
12
78-4025112-01 Rev H0
To Configure the Virtual IP Address for each GbE Port Pair for Port Pair Mode
1 Navigate to the System/IP Network page.
1 Navigate to the System/IP Network page.
Result: The IP Network page is displayed.
2 In the GbE Data Port Mode field, select Dual Port Pairs.
3 In the Video/Data IP address field, change the address.
4 In the Redundancy Mode field, use the drop-down box to select Redundancy for
3 In the Video/Data IP address field, change the address.
4 In the Redundancy Mode field, use the drop-down box to select Redundancy for
each port pair.
5 Click Apply.
6 Click Save.
7 Proceed to configure the four physical GbE Ports IP addresses.
6 Click Save.
7 Proceed to configure the four physical GbE Ports IP addresses.
To Configure the Physical GbE Ports IP Address and Subnet Mask
1 Navigate to the System/IP Network page.
1 Navigate to the System/IP Network page.