Cisco Cisco StadiumVision Director Guida All'Installazione
© 2011 Cisco Systems, Inc. All rights reserved
Page 18 of 71
4
BI_DC+
Bidirectional pair C, +
5
BI_DC-
Bidirectional pair C, -
6
BI_DB-
Bidirectional pair B, -
7
BI_DD+
Bidirectional pair D, +
8
BI_DD-
Bidirectional pair D, -
NIC 1 and NIC 2 (RJ-45) Ethernet Connections
The NIC 1 and NIC 2 connections support 10 BASE-T, 100 BASE-TX, and 1000
BASE-T standards. The transmission speed of the Ethernet ports is autosensing
by default and is user configurable.
BASE-T standards. The transmission speed of the Ethernet ports is autosensing
by default and is user configurable.
for the pinout of the RJ-45 Ethernet port and the modular cable plug
it accepts.
Serial (Console) Port Connections
The console port on the SV Director Server includes an EIA/TIA-232
asynchronous serial (RJ-45) connector. This serial console connector (port)
allows you the capability to access the appliance locally by connecting a
terminal
asynchronous serial (RJ-45) connector. This serial console connector (port)
allows you the capability to access the appliance locally by connecting a
terminal
—either a PC running terminal-emulation software or an ASCII
terminal
—to the console port.
To connect a PC running terminal-emulation software to the console port, use an
RJ-45-to-RJ-45 rollover cable and an RJ-45-to-DB-9 female DTE adapter
(labeled TERMINAL). For more information see
RJ-45-to-RJ-45 rollover cable and an RJ-45-to-DB-9 female DTE adapter
(labeled TERMINAL). For more information see
The default parameters for the console port are 9600 baud, 8 data bits, no parity,
1 stop bit, and no hardware flow control.
1 stop bit, and no hardware flow control.
Serial (Console) Port
The SV Director Server has two standard serial (console) ports. It comes with a
console port cable kit that contains the cable and adapter to connect a console
terminal (an ASCII terminal or PC running terminal-emulation software). The
console cable kit includes the following items:
console port cable kit that contains the cable and adapter to connect a console
terminal (an ASCII terminal or PC running terminal-emulation software). The
console cable kit includes the following items:
RJ-45-to-RJ-45 rollover cable (light blue)
RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)
Use the configuration/setup utility program to change the port address
assignments.
assignments.
Note: The configuration/setup utility program is located in the Cisco ADE 2140
Series appliance ROM and can be accessed through the serial (console) port.
Series appliance ROM and can be accessed through the serial (console) port.