Cisco Cisco StadiumVision Mobile Streamer Manuale Di Manutenzione
© 2011
−2015 Cisco Systems, Inc. All rights reserved.
Commands
The Dashboard drawers contain commands that can be sent by Cisco
StadiumVision Director to perform actions and display settings for devices in Cisco
StadiumVision. There are three categories of commands that are sent by Cisco
StadiumVision Director: Switch commands, DMP commands, and TV commands.
Refer to
StadiumVision Director to perform actions and display settings for devices in Cisco
StadiumVision. There are three categories of commands that are sent by Cisco
StadiumVision Director: Switch commands, DMP commands, and TV commands.
Refer to
Table 2.
Dashboard Command Categories
Command Category
Description
Switch Commands
Switch commands are IOS commands that perform actions and display
information for the Cisco StadiumVision switch. For example, to toggle PoE
on a switch port, you can send the Power Cycle DMP command to instruct
Cisco StadiumVision Director to send the command to the switch. The switch
will send a command back that reboots the PoE to the switch port connected
to the DMP.
information for the Cisco StadiumVision switch. For example, to toggle PoE
on a switch port, you can send the Power Cycle DMP command to instruct
Cisco StadiumVision Director to send the command to the switch. The switch
will send a command back that reboots the PoE to the switch port connected
to the DMP.
DMP Commands
DMP commands perform actions and display information for DMPs. For
example, to restart Flash on a Cisco DMP 4310G, you can send the Restart
Flash command. This will instruct Cisco StadiumVision Director to send an
HTTP command to the DMP and tell it to restart.
example, to restart Flash on a Cisco DMP 4310G, you can send the Restart
Flash command. This will instruct Cisco StadiumVision Director to send an
HTTP command to the DMP and tell it to restart.
TV Commands
TV commands perform actions and display information about TVs. For
example, to turn a TV on or off, you can send the TV On or TV Off command.
Cisco StadiumVision Director will send the command to the DMP and the
DMP will in turn send an RS-232 command across the RS-232 connection to
tell the TV to turn on or off.
example, to turn a TV on or off, you can send the TV On or TV Off command.
Cisco StadiumVision Director will send the command to the DMP and the
DMP will in turn send an RS-232 command across the RS-232 connection to
tell the TV to turn on or off.
Beginning in Cisco StadiumVision Director Release 4.0, some
Management Dashboard commands have been renamed and/or apply only
to the Cisco DMP 4310G. For a summary of changes to the Management
Dashboard commands, see the
Management Dashboard commands have been renamed and/or apply only
to the Cisco DMP 4310G. For a summary of changes to the Management
Dashboard commands, see the
For information about commands supported on the SV-4K media player,
see the “Management Dashboard Commands for the SV-4K Media Player”
topic in the
see the “Management Dashboard Commands for the SV-4K Media Player”
topic in the
the
components when switch commands, DMP commands, and TV commands are sent
by Cisco StadiumVision Director to the Cisco DMP 4310G.
by Cisco StadiumVision Director to the Cisco DMP 4310G.