Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2012 Cisco Systems, Inc. All rights reserved.
Page 38 of 103
Bill of Materials for Test Bed
Bill of Materials for Qualification Testbed
Description
SKU
Qty
Laptop with RS-232 DB9 COM port
1
Home router with DHCP server
1
Ethernet cable
2
DMP 4310
DMP-4310G-53-K9
1
HDMI cable
Included with 4310
1
DVI to HDMI adapter
1
Multi-function 4310 S-Video cable
Custom
1
Power supply for DMP 4310
DMP-4310-PWR
1
Cable for DMP 4310 power supply
CAB-AC-C5
1
RCA audio cable
Included with 4310
1
Standard RS-232 cable for DMP 4310
Included with 4310
1
Standard DB9 to DB9 RS-232 cable
1
RS-232 null modem adapter – DB9 to DB9
1
Firmware Versions
Qualification starts by recording the firmware version of both DMP and the TVs
being qualified. Changing TV or DMP firmware versions might change the
qualification outcome, so the results are only valid for the specific versions tested.
Follow these steps to record the firmware versions:
being qualified. Changing TV or DMP firmware versions might change the
qualification outcome, so the results are only valid for the specific versions tested.
Follow these steps to record the firmware versions:
1. Connect both DMP and laptop to the home router. Then, confirm that they both
receive an IP address from the DHCP server.
2. Browse to the IP address of the DMP. From the DMPDM navigate to the
‘Hardware and Firmware Version’ tab. Record the ‘Firmware Release Version’
and ‘Build Date and Time’ in table 2. If this is not the version that you plan to use
in production, then upgrade the DMP to the production version.
and ‘Build Date and Time’ in table 2. If this is not the version that you plan to use
in production, then upgrade the DMP to the production version.