Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2012 Cisco Systems, Inc. All rights reserved.
Page 71 of 103
To view the workflow status:
1. Open the Dashboard. The Auto Registered folder should be highlighted in red
indicating that there are DMPs that have been auto registered but have not been
provisioned. When a number appears next to Auto Registration in the Device
List, it indicates that there are DMPs that are registered but do not have any
zones or groups assigned.
provisioned. When a number appears next to Auto Registration in the Device
List, it indicates that there are DMPs that are registered but do not have any
zones or groups assigned.
2. Click the Auto Registered folder and select the DMP of interest.
3. Click on the DMP of interest and then click the Console tab below the Device
List to view a message log indicating the DMP’s transition through the five auto-
provisioning steps.
provisioning steps.
, the log messages show that auto-provisioning
step 3: Stage Template is being executed. The progress is indicated as (3 of 5) in
the ‘Checked At’ box in the Device List.
the ‘Checked At’ box in the Device List.
The status messages also indicate that step 2: Upgrade Firmware was skipped
since the DMP already has the correct firmware image.
since the DMP already has the correct firmware image.
Figure 45.
Viewing the DMP Auto-Provisioning Progress