Cisco Cisco StadiumVision Mobile Streamer Manuale Di Manutenzione
© 2012 Cisco Systems, Inc. All rights reserved.
Page 46 of 103
Auto Registration Workflow
1. Upon boot up, the DMP sends a DHCP DISCOVER message including the Option 60
information to identify itself as a DMP 4310 to the DHCP Server.
2. The DHCP server recognizes the identifier and sends back an OFFER including Option
43 information. This information is the URL that tells the DMP where to register. The
URL used for registering is as follows: http://<SV Director IP
Address>:8080/StadiumVision/dmp_reg.
URL used for registering is as follows: http://<SV Director IP
Address>:8080/StadiumVision/dmp_reg.
3. The DMP uses the registration URL to register with Cisco StadiumVision Director.
4. Upon registration Cisco StadiumVision Director creates a DMP object in the database.
The DMP is assigned the name AUTO-xx-xx-xx-xx-xx-xx, where xx-xx-xx-xx-xx-xx is the
MAC address of the DMP.
MAC address of the DMP.
registered with Cisco StadiumVision Director. They are still in the “Not Ready” state as
they have not yet been provisioned.
they have not yet been provisioned.
Figure 35.
Auto-Registered DMPs in the Dashboard
Figure 36.
Auto-Registered DMPs in the Control Panel
Understanding DMP Provisioning
The DMPs require specific configuration and firmware to be provisioned from Cisco
StadiumVision Director before they can be placed into production. This section
describes that workflow.
StadiumVision Director before they can be placed into production. This section
describes that workflow.