Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 25 of 103
HDMI to DVI Connection
Some TVs only provide a DVI interface. Therefore, if you plan to use the included
HDMI cable, you will need to purchase an HDMI-to-DVI adapter cable to connect to
the TV’s DVI-D port. Another option is to purchase an HDMI-to-DVI cable as shown
in
HDMI cable, you will need to purchase an HDMI-to-DVI adapter cable to connect to
the TV’s DVI-D port. Another option is to purchase an HDMI-to-DVI cable as shown
in
Figure 16.
HDMI-to-HDMI with DVI Adapter
DVI carries only the video signal and therefore, if audio is required and the TV offers
audio inputs, separate audio cables between the DMP audio output jacks and the
TV’s audio output jacks are required.
audio inputs, separate audio cables between the DMP audio output jacks and the
TV’s audio output jacks are required.
Note: DMP audio output may connect to external audio distribution equipment if
audio is to be distributed within an area.
audio is to be distributed within an area.
DMP to TV Component Connection
Venues typically require a small number of component connections to
accommodate special devices like projectors or older displays. The DMP uses a
Cisco non-standard DIN-to-Component cable to support these devices. This cable is
not included with the DMP 4310G. For pin-outs and cable schematics please see
“
accommodate special devices like projectors or older displays. The DMP uses a
Cisco non-standard DIN-to-Component cable to support these devices. This cable is
not included with the DMP 4310G. For pin-outs and cable schematics please see
“
.”
Figure 17.
S-Video to Component Connection
If using a DMP S-video output to component convertor cable, you need to configure
the DMP to enable the component interface. This can be done via the Display
Actions web page on the DMPDM interface, or by directly addressing the DMP MIB.
the DMP to enable the component interface. This can be done via the Display
Actions web page on the DMPDM interface, or by directly addressing the DMP MIB.
The following screen shows an example configuration of a DMP connected via the
component cable with the 1080i59 as its Display Standard. Other Display Standards
may be used for different TV models.
component cable with the 1080i59 as its Display Standard. Other Display Standards
may be used for different TV models.