Cisco Cisco StadiumVision Mobile Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 8 of 40
4. Click the Play button in the Device List to execute the command.
Enabling Monitoring Services
Send the Enable Monitoring command to enable the Monitoring service on the
selected DMP(s). Default values for CPU, Memory, and Disk threshold can be
specified in the Director Configuration drawer. This command is only valid for a 4310
model DMP. This command will reboot the device.
selected DMP(s). Default values for CPU, Memory, and Disk threshold can be
specified in the Director Configuration drawer. This command is only valid for a 4310
model DMP. This command will reboot the device.
Changing the Monitoring Thresholds
Send the Change Monitoring Thresholds command to change the CPU, Memory,
and Disk threshold values. Default values for CPU, Memory, and Disk threshold can
be specified in the Director Configuration drawer. This command is valid only for a
4310 model DMP.
and Disk threshold values. Default values for CPU, Memory, and Disk threshold can
be specified in the Director Configuration drawer. This command is valid only for a
4310 model DMP.
Table 1 shows the default server utilization alert thresholds.
Table 1.
Server Utilization Alert Thresholds
In the example shown in Figure 1, the Details window is showing a major alert on the
SWF Memory. This tells us that less than 40% of the available memory is free on the
DMP.
SWF Memory. This tells us that less than 40% of the available memory is free on the
DMP.