Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 10 of 40
Disabling Monitoring
Send the Disable Monitoring command to disable the Monitoring service on the
DMP. This command is valid only for a 4310 model DMP. This command will reboot
the device.
DMP. This command is valid only for a 4310 model DMP. This command will reboot
the device.
Deploying Global DMP Settings
The Global folder contains the Global DMP
Settings command which is used to deploy
Global MIB settings to the selected DMPs on
your network. Not to be confused with SNMP
MIB settings, global MIB settings contain all
Settings command which is used to deploy
Global MIB settings to the selected DMPs on
your network. Not to be confused with SNMP
MIB settings, global MIB settings contain all
configuration settings for the DMP. They function more like registry settings on a PC.
For optimal performance of the StadiumVision system, all DMPs should conform to
the global DMP settings specified in the global MIB.
For optimal performance of the StadiumVision system, all DMPs should conform to
the global DMP settings specified in the global MIB.
There are three types of global DMP settings that correspond to MIB variables. Refer
to Table 2.
to Table 2.
Table 2.
Global DMP Settings
Global MIB Settings
Description
System Default Settings
Settings which are specified by the SV Director and cannot be modified by
the end user. Examples include the "Startup URL" setting.
the end user. Examples include the "Startup URL" setting.
System Recommended
Settings
Settings
Settings which have been determined to be desirable for most
StadiumVision installations. These settings can be modified.
StadiumVision installations. These settings can be modified.
User-specified Settings
DMP settings which are customizable for the customer‟s site.
To deploy global MIB settings to the DMPs on your network:
1. Configure the global MIB variables using the Director Configuration > System
Configuration > Global DMP Settings option on the Dashboard. See the
Management Dashboard Director Configuration Drawer Commands Guide for
details.
Management Dashboard Director Configuration Drawer Commands Guide for
details.
2. Select Device Configuration > Global > Global DMP Settings.
3. Expand the Device List and select the DMP(s) on which you want to deploy the
global MIB settings.
4. Send the Global DMP Settings command.