Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 30 of 40
be specified for Mode: CC1, CC2, CC3, CC4 or CS1, CS2, CS3, CS4. Set the Mode
to "OFF" to turn off closed caption. Refer to Figure 20.
to "OFF" to turn off closed caption. Refer to Figure 20.
Figure 20. Setting Closed Captioning Parameters
Setting the TV Output Volume Level
Send the TV Commands > Set Volume command to set the output volume level on
the TV controlled by the selected DMP(s). Depending on the DMP configuration, this
command will set the output volume at any of the following locations:
the TV controlled by the selected DMP(s). Depending on the DMP configuration, this
command will set the output volume at any of the following locations:
The internal DMP output volume level.
The connected TVs‟ output volume level (via RS-232).
The volume for the TVs‟ left speaker (leftVolume). Valid value is from 0 to 100.
The volume for the TVs‟ right speaker (rightVolume). Valid value is from 0 to 100.
You can configure the volume granularity in the Control Panel. Refer to the
StadiumVision Video Delivery Endpoints Design and Implementation Guide.
StadiumVision Video Delivery Endpoints Design and Implementation Guide.