Cisco Cisco StadiumVision Director Guida All'Installazione Rapida
l
CiscoStadiumVision Director uses responses only when querying a TV for its
current power on/off status.
l
For situations where a TV cannot be controlled via RS-232 or otherwise, volume
and mute can be controlled by the media player instead. For the Cisco DMP-
4310G, this is done by configuring volume and mute commands that start with
sigma=.
Configuring Basic Information for TV Display
Specifications
Specifications
User Roles
Administrator
IMPORTANT: The X/Y Position, X/Y Scaling, and Touchscreen
options are supported by TV displays connected to Cisco DMP
4310G devices only.
To configure basic information for TV display specifications, complete the
following steps:
following steps:
1. Go to Control Panel > Setup > Devices > Display Specifications.
2. Do one of the following:
l
Select an existing display specification (
).
l
Click the + icon to add a new display specification.
Figure 10. TV Display Specifications—Basic Info Panel
© Cisco Systems, Inc. All rights reserved.
37 of 331