Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 17 of 94
once. Rigid mounts are preferred to Velcro or other adhesives. If Velcro is used then
it must be rated for continuous temperatures of 122 degrees F or higher.
it must be rated for continuous temperatures of 122 degrees F or higher.
There are four DMP mounting options:
Cisco Träger Mounting Bracket (custom)
The Cisco Sports and Entertainment group designed a custom “Träger” mounting
bracket for attaching the DMP to the TV. The Träger bracket has the following
features:
bracket for attaching the DMP to the TV. The Träger bracket has the following
features:
Inexpensive
Manufactured from light-weight, but durable, material
Custom-designed to fit the DMP 43xx form factor
An optional method to secure the DMP from removal
Easy access to the TV/DMP rear panel and cabling
Lateral ventilation slots on three sides to allow airflow through the DMP
You can attach the Träger bracket to the TV using Velco or another semi-
permanent/permanent fastener (see the “Velcro Mounting” section). The Velcro is
applied between the rear of the TV and the back of the Träger bracket rather than
directly to the DMP. This design securely attaches the DMP to the TV while allowing
the TV to easily slide out of the Träger for servicing.
permanent/permanent fastener (see the “Velcro Mounting” section). The Velcro is
applied between the rear of the TV and the back of the Träger bracket rather than
directly to the DMP. This design securely attaches the DMP to the TV while allowing
the TV to easily slide out of the Träger for servicing.
Notes:
When using Velcro to mount the Träger bracket to the TV, use three or more
strips of Velcro, if possible, in the vertical direction.
The bracket should be mounted such that the “ears” of the bracket are on the
rear side of the DMP. This will prevent the bracket from falling in the event that
the Velcro loses its adherence to the TV. Installed this way, the bracket will
remain around the DMP that is hanging from the cables, instead of falling and
possibly injuring someone that may be under the TV.
rear side of the DMP. This will prevent the bracket from falling in the event that
the Velcro loses its adherence to the TV. Installed this way, the bracket will
remain around the DMP that is hanging from the cables, instead of falling and
possibly injuring someone that may be under the TV.
Specifications
Material: 1.59mm (0.0625”) Stainless Steel
Dimensio
ns: 182.778mm (7.196”) x 149.428mm (5.883”) x 41.631mm (1.639”)