Cisco Cisco StadiumVision Director

You can configure a playlist to loop continuously when you have a playlist with a single video content 
item set for a duration of zero, with the playlist duration also set to zero. 

For best results, the first and last frame in the video should be identical or close to identical. 

For more information about limitations for video and non-video playlists and their expected behavior in 
Cisco StadiumVision Director Release 2.4, see the 

This section includes the following installation information:

Platform 2 (SV-DIRECTOR-K9 or SV-PLATFORM2=) of the Cisco StadiumVision Director server 
requires installation of the Unified Computing System (UCS) Server Firmware Version 1.4(2) or later to 
avoid problems powering off the server hardware.

You can verify the firmware version installed on Platform 2 of the Cisco StadiumVision Director server 
by running a Basic System State Report from the Cisco StadiumVision Director main menu.

In the OS Information section of the Basic System State Report, look for “BIOS Information” and 
“Version” below the “Handle 0x00005, DMI type 0, 24 bytes” line, as shown in the following example.

BIOS firmware version 1.4.1 is the compatible version packaged with CIMC firmware version 1.4.2.

If your version is less than “1.4.1,” then an upgrade is needed:

Handle 0x0005, DMI type 0, 24 bytes.

BIOS Information

Vendor: Cisco Systems, Inc.

Version: C200.1.1.1a.0.032920100525

Release Date: 03/29/2010

If the vendor information in this section is Intel Corporation, and the version begins with 
“S5000,” then this is not a Platform 2 server, but rather a Cisco ADE 2140 Series server. This 
BIOS upgrade process does not apply to the Cisco ADE 2140 Series server.