Cisco Cisco Media Delivery Engine 1100 model

We recommend that customers with variable bit rates cap the bit rate at the encoder to avoid bit rate 
spikes, which may result in throughput exceeding the supported throughput allowed in the Cisco ECDS. 
Use the show bitrate [movie-streamer | wmt] command in Privileged EXEC mode to display the bit 
rate allocated to a particular device. Use the bitrate command in Global configuration mode to configure 
the maximum pacing bit rate for large files for the Movie Streamer and to separately configure WMT 
bit-rate settings.

In the current release, the origin server OFQDN is always used, and the hostname/port in the Manifest 
file is ignored.

When configuring network settings on your Service Engine, make sure that you configure NTP in 
General Settings > Network > NTP and enter the ntp server <ntp-server-IP> command. This enables 
the Service Engine to work properly with Flash Media Streamer and successfully sync with CDSM. 

WCCP always binds to the first interface. The streaming interface can still be configured for service 
routing.

Observe the following recommendations for the Cisco MDE 3100 Series:

CIMC RAID management is not supported. The appliance drives do not appear on the CIMC 
Inventory > Storage screen.