Cisco Cisco ONS 15310-MA SONET Multiservice Platform Guida All'Installazione
5
Installing the DS1-28/DS3-EC1-3 and DS1-84/DS3-EC1-3 Cards in the Cisco ONS 15310-MA
78-17332-01
Install the DS1-28/DS3-EC1-3 and DS1-84/DS3-EC1-3 Cards
–
Cable loss: Max 450 feet 734A or 728A
–
AIS: TR-TSY-000191 compliant
–
Power level: -1.8 +/- 5.7 dBm
–
Pulse shape: ANSI T1.102-1988 Figure 8
–
Pulse amplitude: 0.36 to 0.85 V peak to peak
–
Loopback modes: Terminal and facility
–
Line build out: 0 to 225 feet, 226 to 450 feet
•
Electrical interface: BNC connectors on high-density EIA
•
Surge protection: Telcordia GR-1089
•
Operating temperature: I-Temp, -40 to +65 degrees Celsius.
•
Operating humidity: 5 to 95 percent, noncondensing
•
Power consumption: 36.60 W, 0.76 A, 124.97 BTU/hr
•
Dimensions
–
Height: 6.93 in. (17.60 cm)
–
Width: 1.35 in. (3.43 cm)
–
Depth: 8.80 in. (22.35 cm)
–
Card weight: 1.5 lbs (0.68 kg)
Install the DS1-28/DS3-EC1-3 and DS1-84/DS3-EC1-3 Cards
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Caution
Ensure that the patch panel is grounded before installing the DS1-28/DS3-EC1-3 or DS1-84/DS3-EC1-3
electrical cards on the Cisco ONS 15310-MA chassis.
electrical cards on the Cisco ONS 15310-MA chassis.
Warning
When installing the unit, always make the ground connection first and disconnect it last. Statement 42.
Caution
Always use the supplied ESD wristband when working with a powered ONS 15310-MA. Plug the
wristband cable into either of the ESD jacks, on the far left and right faceplates in the shelf.
wristband cable into either of the ESD jacks, on the far left and right faceplates in the shelf.