Cisco Cisco Web Security Appliance S380 Guida Utente
Chapter 3 Deployment
Connecting the Appliance to a WCCP Router
3-14
Cisco IronPort AsyncOS 7.1 for Web User Guide
OL-23207-01
Example 3
Suppose you have the WCCP service shown in
Figure 3-5
Example WCCP Service — Dynamic Service, Password
Required
Required
In this example, the WCCP service defines a dynamic service group with service
ID of 120. The redirection basis is on the destination port, and it has enabled a
password for this service group of “admin99” (hidden in the appliance
configuration). Also suppose in this example that you want to configure the
ethernet0 interface on the router for this service group.
ID of 120. The redirection basis is on the destination port, and it has enabled a
password for this service group of “admin99” (hidden in the appliance
configuration). Also suppose in this example that you want to configure the
ethernet0 interface on the router for this service group.
Use the following WCCP configuration for this example:
ip wccp version 2
ip wccp 120
interface ethernet0
ip wccp 120 redirect in
ip wccp 120 password admin99