Brother HL-5070N Guida All'Installazione Rapida
3
FDA-forskrifter (gjelder bare 100 til120 V-modellen)
U.S. Food and Drug Administration (FDA) har innført forskrifter for
laserprodukter produsert på og etter 2. august 1976. Produkter som
markedsføres i USA, skal tilfredsstille disse kravene. Én av følgende etiketter
på baksiden av skriveren angir overensstemmelse med FDA-forskriftene og
må festes til laserprodukter som markedsføres i USA.
laserprodukter produsert på og etter 2. august 1976. Produkter som
markedsføres i USA, skal tilfredsstille disse kravene. Én av følgende etiketter
på baksiden av skriveren angir overensstemmelse med FDA-forskriftene og
må festes til laserprodukter som markedsføres i USA.
☛
Forsiktig:
Bruk av kontroller, justering eller utførelse av
fremgangsmåter som ikke er angitt i denne
brukermanualen, kan føre til at du blir utsatt for farlig
stråling.
fremgangsmåter som ikke er angitt i denne
brukermanualen, kan føre til at du blir utsatt for farlig
stråling.
IEC 60825-spesifikasjon (kun modeller med 220-240 volt)
Skriveren er et laserprodukt i klasse 1, som definert i IEC 60825-
spesifikasjonene. Merket som er vist nedenfor, er festet på produktet i de
landene det kreves.
spesifikasjonene. Merket som er vist nedenfor, er festet på produktet i de
landene det kreves.
Denne skriveren har en laserdiode av klasse 3B, som produserer usynlig
laserstråling i skannerenheten. Du må ikke under noen omstendigheter åpne
skanneren.
laserstråling i skannerenheten. Du må ikke under noen omstendigheter åpne
skanneren.
☛
Forsiktig:
Bruk av kontroller eller justeringer eller prosedyrers
yteevne ut over det som står spesifisert her, kan resultere
i farlig stråling.
yteevne ut over det som står spesifisert her, kan resultere
i farlig stråling.
For Sverige og Finland
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
☛
Varoitus!
Laitteen käyttäminen muulla kuin tässä käyttöohjeessa
mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle.
mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle.
☛
Varning
Om apparaten används på annat sätt än i denna
Bruksanvisning specificerats, kan användaren utsättas för
osynlig laserstrålning, som överskrider gränsen för
laserklass 1.
Bruksanvisning specificerats, kan användaren utsättas för
osynlig laserstrålning, som överskrider gränsen för
laserklass 1.
Intern laserstråling
Maksimal strålingsstyrke: 5 mW
Bølgelengde:
Bølgelengde:
760 - 810 nm
Laserklasse:
Klasse IIIb
Klasse IIIb (i henhold til 21 CFR, del 1040.10)
Klasse 3B
(i henhold til IEC 60825)
Klasse IIIb (i henhold til 21 CFR, del 1040.10)
Klasse 3B
(i henhold til IEC 60825)
VIKTIG – personsikkerhet
For sikker drift må støpselet som følger med kun settes inn i en standard
stikkontakt som er jordet på vanlig måte.
stikkontakt som er jordet på vanlig måte.
Forlengelsesledninger som brukes sammen med denne skriveren, må være
av samme type for å gi skikkelig jording. Forlengelsesledninger med feil
utførelse kan føre til personskade og skade på utstyret.
av samme type for å gi skikkelig jording. Forlengelsesledninger med feil
utførelse kan føre til personskade og skade på utstyret.
Det faktum at utstyret fungerer tilfredsstillende, betyr ikke at jordingen
fungerer, og at monteringen er helt sikker. Hvis du er i tvil om jordingen
fungerer som den skal, bør du kontakte en kvalifisert elektriker for din egen
sikkerhet.
fungerer, og at monteringen er helt sikker. Hvis du er i tvil om jordingen
fungerer som den skal, bør du kontakte en kvalifisert elektriker for din egen
sikkerhet.
Koble fra skriveren
Du må installere skriveren i nærheten av en lett tilgjengelig stikkontakt. I
nødstilfelle må du trekke ut stikkontakten for å stenge strømtilgangen helt.
nødstilfelle må du trekke ut stikkontakten for å stenge strømtilgangen helt.
Vær forsiktig med batterier
Ikke bytt ut batteriet. Det kan oppstå en eksplosjon hvis batteriet er feil
plassert. Du må ikke demontere, lade opp eller kvitte deg med batteriet i
nærheten av flammer. Kvitt deg med batteriet i samsvar med lokale
forskrifter.
plassert. Du må ikke demontere, lade opp eller kvitte deg med batteriet i
nærheten av flammer. Kvitt deg med batteriet i samsvar med lokale
forskrifter.
Vær forsiktig med LAN-koblinger
Koble dette produktet til en LAN-kobling som ikke utsettes for andre
spenninger.
spenninger.
IT-strømsystem (kun for Norge)
Dette produktet er laget for et IT-strømsystem med en fase-til-fase-spenning
på 230 v.
på 230 v.
Opmerking / Oplaadbare Batterij Recycle Informatie (For
Netherlands Only)
Netherlands Only)
Bij dit product zijn batterijen geleverd. Wanneer deze
leeg zijn, moet u ze niet weggooien maar inleveren als
Klein Chemisch Afval.
leeg zijn, moet u ze niet weggooien maar inleveren als
Klein Chemisch Afval.
Geräuschemission / Acoustic Noise Emission (gjelder bare
Tyskland)
Tyskland)
Lpa < 70 dB (A) DIN 45635-19-01-KL2
Wiring information (kun for UK)
Important
If the mains plug that is supplied with this printer is not suitable for your plug
socket, remove the plug from the mains lead and fit an appropriate three-pin
plug. If the replacement plug needs a fuse, fit the same fuse as the original.
socket, remove the plug from the mains lead and fit an appropriate three-pin
plug. If the replacement plug needs a fuse, fit the same fuse as the original.
If a moulded plug comes off the mains lead, you should destroy it because a
plug with cut wires is dangerous if it is put in a live plug socket. Do not leave
it where a child might find it!
plug with cut wires is dangerous if it is put in a live plug socket. Do not leave
it where a child might find it!
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to
BS1362 with the same rating as the original fuse.
BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover.
Warning - This printer must be earthed.
The wires in the mains lead are coloured in line with the following code :
Green and Yellow:
Earth
Blue: Neutral
Brown: Live
Brown: Live
The colours of the wires in the mains lead of this printer may not match the
coloured markings identifying the terminals in your plug.
coloured markings identifying the terminals in your plug.
If you need to fit a different plug, you should do the following.
Remove a bit of the outer cover of the lead, taking care not to damage the
coloured insulation of the wires inside.
coloured insulation of the wires inside.
Cut each of the three wires to the appropriate length. If you can, leave the
green and yellow wire longer than the others so that, if the lead is pulled out
of the plug, the green and yellow wire will be the last to disconnect.
green and yellow wire longer than the others so that, if the lead is pulled out
of the plug, the green and yellow wire will be the last to disconnect.
Remove a short section of the coloured insulation to expose the wires.
The wire which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter “E” or the safety earth
symbol
terminal in the plug which is marked with the letter “E” or the safety earth
symbol
, or coloured green or green and yellow.
The wire, which is coloured blue, must be connected to the terminal, which is
marked with the letter “N” or coloured black or blue.
marked with the letter “N” or coloured black or blue.
The wire, which is coloured brown, must be connected to the terminal, which
is marked with the letter “L” or coloured red or brown.
is marked with the letter “L” or coloured red or brown.
The outer cover of the lead must be secured inside the plug. The coloured
wires should not hang out of the plug.
wires should not hang out of the plug.
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21
CFR subchapter J.
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21
CFR subchapter J.
MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA radiation performance standards, 21
CFR Subchapter J
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA radiation performance standards, 21
CFR Subchapter J
CLASS 1LASERP RODUCT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT