Optoma BX-AL133 Scheda Tecnica
Datasheet – BX-AL133
© Copyright 2006 Optoma Technology, Inc. All specifications subject to change at any time.
HIGH-DEFINTION LIFESTYLE
6.92”
(knob end to knob end)
7.70”
Four bracket mounting slots accept 1/4” screws
Ceiling Structure or Projector Plate
2.75” to 4.5”
The BX-AL133 lens is a heavy product. Use
extreme caution if hanging from ceiling.
extreme caution if hanging from ceiling.
When using the BX-AL133
mount please follow the
instructions for proper installation
Optics:
Transmission:
System Weight:
Patented, coated, five-element glass
achromatic, anastigmatic design
achromatic, anastigmatic design
Minimum 20% net brightness increase
versus standard letterbox imaging.
versus standard letterbox imaging.
8.5lbs. (3.9kg) with bracket
Assembled in the USA using components made in the USA and other countries.
BX-AL133 Anamorphic Lens
With Optoma’s anamorphic lens, the option to create a true
cinematic setting is easier than ever. The Optoma
BX-AL133 Anamorphic Lens offers true 2.35:1 aspect
ratio in genuine movie theater style to match many of
today’s DVD offerings.
cinematic setting is easier than ever. The Optoma
BX-AL133 Anamorphic Lens offers true 2.35:1 aspect
ratio in genuine movie theater style to match many of
today’s DVD offerings.
Optoma’s BX-AL133 anamorphic lens is easy to
install and will work perfectly with a home
theater projector that is either sitting
table-top or mounted. The accompanying
mounting bracket can be attached directly to
the ceiling or a projector plate. A self-made riser
block may be needed if the bracket itself does not
allow for proper positioning.
install and will work perfectly with a home
theater projector that is either sitting
table-top or mounted. The accompanying
mounting bracket can be attached directly to
the ceiling or a projector plate. A self-made riser
block may be needed if the bracket itself does not
allow for proper positioning.
To use: Mount the BX-AL133 as close to the projector lens as
possible, so that the projector beam enters the center of the rear
lens opening. Leave enough room to tilt the anamorphic lens within the
bracket so that the shape of the image is the same at the top and bottom.
possible, so that the projector beam enters the center of the rear
lens opening. Leave enough room to tilt the anamorphic lens within the
bracket so that the shape of the image is the same at the top and bottom.
BASIC REQUIREMENTS
The width of the projector beam should be less than three (3)
inches from where it enters the Optoma BX-AL133
anamorphic lens
anamorphic lens
The recommended minimum throw distance from the
projector lens to the screen should be at least 12 feet
The throw distance divided by the image width (“throw ratio”)
should be at least 1.6, prior to adding the Optoma BX-AL133
Before attaching the lens, the image must appear vertical
stretched; this can be done by selecting the “LBX” aspect
ratio from the projector’s display menu
ratio from the projector’s display menu
NOTES
Any rotation of the lens around the vertical axis will slightly
shift the image in a horizontal direction
To clean: Lightly blow off any surface debris from the
lens. If needed, clean the lens using standard cleaning
supplies while the projector is on (be careful not to look
directly into the light beam of the projector)
supplies while the projector is on (be careful not to look
directly into the light beam of the projector)
LIMITED WARRANTY
Optoma Technology Inc., warrants this product to be free of defects in
original workmanship and material for a period of thirty months from the
date of manufacture listed on or inside its shipping container. During this
period, a defective unit may be repaired or replaced, at the discretion of
Optoma Technology inc., by returning it in its original packaging with a
copy of your receipt. This warranty does not cover damage as a result
from lack of proper care, accident, misuse or any cosmetic damage not
reported within 15 days of purchase. Damages are limited to the cost of
the product. A service charge may be applied to any returned product
requiring cosmetic attention or to the repair of any damage not covered
under this warranty.
original workmanship and material for a period of thirty months from the
date of manufacture listed on or inside its shipping container. During this
period, a defective unit may be repaired or replaced, at the discretion of
Optoma Technology inc., by returning it in its original packaging with a
copy of your receipt. This warranty does not cover damage as a result
from lack of proper care, accident, misuse or any cosmetic damage not
reported within 15 days of purchase. Damages are limited to the cost of
the product. A service charge may be applied to any returned product
requiring cosmetic attention or to the repair of any damage not covered
under this warranty.