Optoma BX-AL133 Ficha De Dados

© Copyright 2006 Optoma Technology, Inc.  All specifications subject to change at any time.

HIGH-DEFINTION LIFESTYLE

6.92”

(knob end to knob end)

7.70”

Four bracket mounting slots accept 1/4” screws

2.75” to 4.5”

The BX-AL133 lens is a heavy product. Use 
extreme caution if hanging from ceiling.

When using the BX-AL133

 mount please follow the

 instructions for proper installation

Optics:

Transmission:

System Weight:

Patented, coated, five-element glass
achromatic, anastigmatic design

Minimum 20% net brightness increase
versus standard letterbox imaging.

8.5lbs. (3.9kg) with bracket

Assembled in the USA using components made in the USA and other countries.

With Optoma’s anamorphic lens, the option to create a true 
cinematic setting is easier than ever.  The Optoma 
BX-AL133 Anamorphic Lens offers true 2.35:1 aspect 
ratio in genuine movie theater style to match many of 
today’s DVD offerings.

Optoma’s BX-AL133 anamorphic lens is easy to 
install and will work perfectly with a home 
theater projector that is either sitting 
table-top or mounted.  The accompanying 
mounting bracket can be attached directly to 
the ceiling or a projector plate.  A self-made riser 
block may be needed if the bracket itself does not 
allow for proper positioning.

To use:  Mount the BX-AL133 as close to the projector lens as 
possible, so that the projector beam enters the center of the rear 
lens opening.  Leave enough room to tilt the anamorphic lens within the 
bracket so that the shape of the image is the same at the top and bottom.

              BASIC REQUIREMENTS



 

 The width of the projector beam should be less than three (3) 

inches from where it enters the Optoma BX-AL133 
anamorphic lens



  

The recommended minimum throw distance from the 

projector lens to the screen should be at least 12 feet



 

 The throw distance divided by the image width (“throw ratio”) 

should be at least 1.6, prior to adding the Optoma BX-AL133



 

 Before attaching the lens, the image must appear vertical 

stretched; this can be done by selecting the “LBX” aspect 
ratio from the projector’s display menu

              NOTES



 

 Any rotation of the lens around the vertical axis will slightly 

shift the image in a horizontal direction



  

To clean:  Lightly blow off any surface debris from the 

lens.  If needed, clean the lens using standard cleaning 
supplies while the projector is on (be careful not to look 
directly into the light beam of the projector)

              

Optoma Technology Inc., warrants this product to be free of defects in 
original workmanship and material for a period of thirty months from the 
date of manufacture listed on or inside its shipping container.  During this 
period, a defective unit may be repaired or replaced, at the discretion of 
Optoma Technology inc., by returning it in its original packaging with a 
copy of your receipt.  This warranty does not cover damage as a result 
from lack of proper care, accident, misuse or any cosmetic damage not 
reported within 15 days of purchase.  Damages are limited to the cost of 
the product.  A service charge may be applied to any returned product 
requiring cosmetic attention or to the repair of any damage not covered 
under this warranty.