Brother HL-L6250DW Guida Utente

 Home > 

 > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast

>> HL-L6250DW
>> HL-L6400DW/HL-L6400DWT

Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings.

  

Infrastructure

Open System

NONE

-

WEP

Shared Key

WEP

WPA/WPA2-PSK

AES

TKIP
(TKIP is supported for
WPA-PSK only.)

For example:

HELLO

Infrastructure

WPA2-PSK

AES

12345678

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.

2. Press a or b to select the [Network] option, and then press OK.
3. Press a or b to select the [WLAN] option, and then press OK.
4. Press a or b to select the [Setup Wizard] option, and then press OK.
5. When [WLAN Enable?] appears, press a to select On.

This will start the wireless setup wizard. To cancel, press Cancel.

6. The machine will search for your network and display a list of available SSIDs. Press a or b to select the

[<New SSID>] option, and then press OK.

7. Enter the SSID name, and then press OK.
8. Press a or b to select the [Infrastructure] option, and then press OK.
9. Press a or b to select the Authentication Method you want, and then press OK.
10. Do one of the following:

•

If you selected the [Open System] option, press a or b to select the Encryption Type [None] or [WEP],
and then press OK.
If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press OK.

•

If you selected the [Shared Key] option, enter the WEP key, and then press OK.