Samsung DVD-VR350 Manuale Utente

English - 60

1.  With the unit in Stop mode/No Disc mode, press the EZ REC MODE 

button on the remote control.

2.  Press the ◄ ► buttons to select On, and then press the OK button.

The EZ REC MODE is set up.

3.  Insert a disc.

If the disc is new, it will initialise automatically.

4.  Press the REC button.
5.  EZ REC MODE will Automatically Finalise the disc under the following 

conditions.

-  When you press the OPEN/CLOSE button on your DVD Recorder & 

VCR after recording on at least 30% of the disc. The tray will open after 
the disc has been fi nalised.

-  When the disc is full, it will fi nalise automatically and the DVD Recorder 

& VCR will remain in stop mode.

-  When you make a timer recording and it occupies at least 30% of the 

disc, the disc will fi nalise automatically and the DVD Recorder & VCR 
will power off. Please note that auto fi nalisation will not work if the 
DVD Recorder & VCR has more than one Timer Recording set in the 
Scheduled Record List.

DVD-VR355 only

 If you insert a new DVD-RW disc, it will be formatted in V mode 
after auto initialising.
 If you select off, you must initialise (see page 52) and fi nalise the 
disc manually in the Disc Manager menu.(see page 77)
 The length of Recording is different according to recording mode.
(see page 52)

■

■

■

01293C-VR350,355-XEB-ENG.indb   60

01293C-VR350,355-XEB-ENG.indb   60

2007-03-16   오후 5:16:18

2007-03-16   오후 5:16:18