Samsung SNT-1010P Manuale Utente
47
Chapter 7 Using SNT-1010
Viewer Screen Buttons and Functions
46
Viewer Screen Buttons and Functions
(Continued)
Using SNT-1010
To Capture a Video
1
At a desired scene, click the [CAPTURE] button.
The capture confirmation window appears.
2
Click [OK].
The captured screen image is saved in the specified folder path.
The default saving path is “C:WProgram FilesWSamsungWSNT-1010WSnapShot”.
To change the saving path, click <BASIC CONFIGURATION>
<LOCAL SAVE PATH> in the SETUP screen.
The file is automatically named as follows: “YYMMDD_HHMMSS_device name_EncoderID.extension”.
Example) 20060207_121015_SNT-1010_EncoderBox.jpg
Capturing a screen is available even during a recording. In this case, the <Overlay> is also captured together.
Note
To Record a Video
1
At desired scene, click the [RECORD] button.
On the viewer screen, <REC> indicator appears and the
recording is started.
recording is started.
REC
2
To stop a recording, click the [RECORD] button once again.
The captured screen image is saved in the specified
saving path.
saving path.
The default saving path is “C : WProgram FilesWSamsungWSNT-1010WVideoClip”.
To change the saving path, click <BASIC CONFIGURATION>
To change the saving path, click <BASIC CONFIGURATION>
<LOCAL SAVE PATH> in the SETUP screen.
The file is automatically named as follows: “YYMMDD_HHMMSS_device name_EncoderID. extension”.
Example) 20060207_121015_SNT-1010_EncoderBox.cam
The maximum recording time is 10 minutes.If a recording exceeds the time limit, the recording is automatically
terminated and the announcement message appears.
The user can select and record a camera video and stop it.
Example) 20060207_121015_SNT-1010_EncoderBox.cam
The maximum recording time is 10 minutes.If a recording exceeds the time limit, the recording is automatically
terminated and the announcement message appears.
The user can select and record a camera video and stop it.
Note
Button
Function and Description
Saves the current video as a .cam video file.
Page 47
You can use camera functions such as lens
direction control, menu setting, preset, etc.
direction control, menu setting, preset, etc.
Page 48
Captures the current picture on the screen and saves it as a .jpg or .bmp image file.
Page 47
You can Open/Play/Pause/Stop a saved file.
If the file size is big, the loading time might be long
If you click the [LISTEN] button, the speaker icon appears on the screen and you can hear the audio from the current video source.
If you click the [SPEAK] button, you can transmit your voice to the SNT-1010 using a microphone.
If multiple users are connected to an SNT-1010, only one user can send his voice at a time.
You can control the volume of the current video by using the [VOL ] buttons in 10 steps.
A banner image set in the <LAYOUT>
<SCREEN LOOK> of the SETUP screen appears here.
If a banner link is set, you can open the linked site by clicking it.
Initially, no banner image is set.
This function is available when multiple SNT-1010’s are connected.
Each video channel of the connected SNT-1010’s is displayed sequentially.
This function is not available while playing a recorded file.
If the screen size is <SINGLE>, this function is available only when more than 1 SNT-1010 are in the <SNT-1010 List>.
If the screen size is <QUAD>, this function is available only when more than 4 SNT-1010 are in the <SNT-1010 List>
If the screen size is <SINGLE>, each video channel is displayed by turns.
If the screen size is <QUAD>, 4 videos channels are displayed by turns.