Samsung SNT-1010P Manuale Utente
49
Chapter 8 Setting Up
Setting SNT-1010
48
Setting Up
Viewer Screen Buttons and Functions
(Continued)
Using SNT-1010
Setting SNT-1010
You can set various functions such as Basic Setting, System,
Layout, etc.
Layout, etc.
In the viewer screen, click the [SETUP] tab.
The SETUP screen appears.
To use the camera related functions
These functions are activated only if they are supported by the camera and are the same as the camera settings.
Power Pan and Tilt Function
This function works only in a camera supporting the power pan-and-tilt. Ex) Samsung SCC-6475
If you click over a point you want, this function moves the camera so that the point comes to the center of the screen.
If you click over a point you want, this function moves the camera so that the point comes to the center of the screen.
If you drag the mouse downward while holding down the left mouse button, the video is zoomed in while you drag the mouse upward, the screen is zoomed out.
SETUP Screen Layout
SETUP Screen
VIDEO
IP
USER
EXTERNAL SNT-1010
LOCAL SAVE PATH
LANGUAGE
DATE/TIME
STATUS
LOG
S/W UPDATE
RESET
RS485
OVERLAY IMAGE
OVERLAY TEXT
SCREEN LOOK
VIEW HTML
TRANSFER SETUP
ALARM IMAGE
ALARM INPUT1
ALARM INPUT2
ALARM INPUT3
ALARM INPUT4
MOTION DETECTION
VIDEO LOSS
SCHEDULE TRANSFER
STREAMING SETUP
BASIC CONFIGURATION
SYSTEM
LAYOUT
EVENT
NETWORK
IP NOTIFICATION
DDNS
Moving lens direction and selecting a menu
- You can adjust the camera lens direction using the 8 direction buttons.
While you are pressing the button, the camera moves and if you release the button, the camera stops.
-
buttons are used to navigate through the menu in the camera menu screen.
- [ENTER] button is used to select a menu item in the camera menu screen.
Entering Camera Menu
- The camera menu screen appears.
Zoom Function
- Click the [ZOOM IN] button to zoom-in.
- Click the [ZOOM OUT] button to zoom-out.
Focus Function
- Press the [Focus Near] button to adjust the focus nearer.
- Press the [Focus Far] button to adjust the focus farther.
Preset Function
- Moves the lens direction to a preset direction.
Autopan Function
- Moves the camera lens direction between 2 points set for the camera.
Scan Function
- Moves the camera lens direction between 2 preset points of the camera.
Alarm Reset Function
- Returns the current alarm settings to the default.
Pattern Function
- You can set camera various movement patterns such as zoom, move, etc. so that a
camera automatically moves according to the pattern.
The Focus function is available only in Manual Focus mode.
The Power Pan & Tilt function can make angular difference, depending on the zooming level of the camera.
The Power Pan & Tilt function can make angular difference, depending on the zooming level of the camera.
Notice