Access virus os4 Manuale Utente
ACCESS VIRUS OS4
253
System Exclusive Data
Page C contains Multi parameters
and Global parameters. These
parameters are sent and received
only by SysEx Parameter Change.
and Global parameters. These
parameters are sent and received
only by SysEx Parameter Change.
In the following, all bytes are
shown in hexadecimal representa-
tion.
shown in hexadecimal representa-
tion.
Control Change message
(only Page A)
(only Page A)
Bc
Status byte,
c=MIDI channel
c=MIDI channel
nn
Parameter Number 0..127
(see parameter list Page A)
(see parameter list Page A)
vv
Parameter Value 0..127
see parameter list Page A)
see parameter list Page A)
The Control Change messages
are defined as Performance Con-
troller (e.g. Modulation Wheel or
Hold Pedal) or Sound Parameters
(e.g. Cutoff or Patch Volume). The
Performance Controllers are not
stored with a Single-Sound. If more
than one Multi Part is set to the
same MIDI channel, all Parts on this
MIDI channel receive the same Per-
formance Controllers. The Sound
Parameters are stored with a Single
Sound. If more than one Multi Part
is set to the same MIDI channel, the
Sound Parameter is receiced only by
the Multi Part with the lowest part
number.
troller (e.g. Modulation Wheel or
Hold Pedal) or Sound Parameters
(e.g. Cutoff or Patch Volume). The
Performance Controllers are not
stored with a Single-Sound. If more
than one Multi Part is set to the
same MIDI channel, all Parts on this
MIDI channel receive the same Per-
formance Controllers. The Sound
Parameters are stored with a Single
Sound. If more than one Multi Part
is set to the same MIDI channel, the
Sound Parameter is receiced only by
the Multi Part with the lowest part
number.
Example: B0,21,40 Set oscillator
balance (21 hex = 33 dec) on MIDI
channel 1 to the middle position
(40 hex =64 dec).
balance (21 hex = 33 dec) on MIDI
channel 1 to the middle position
(40 hex =64 dec).