Access os5 Manuale Utente
84
CHAPTER 6
Synthesis Parameters
Synthesis Parameters
FEEDBACK
Controls the amount of feedback in the Chorus.
On the chorus, FEEDBACK lets you boost spe-
cific frequencies in the delayed signal to create
a flanger effect. The FEEDBACK parameter is
bipolar; positive or negative feedback values let
you dial in different flanger characteristics.
On the chorus, FEEDBACK lets you boost spe-
cific frequencies in the delayed signal to create
a flanger effect. The FEEDBACK parameter is
bipolar; positive or negative feedback values let
you dial in different flanger characteristics.
01111111111111111112
1 CHORUS
Feedback +0≤
Feedback +0≤
61111111111111111154
SHAPE
Determines the waveshape of the chorus LFO.
You can select from among 68 waveshapes
(just like for the main LFOs).
You can select from among 68 waveshapes
(just like for the main LFOs).
01111111111111111112
1 CHORUS
Shape Triangle≤
Shape Triangle≤
61111111111111111154
PHASER (PANEL)
DIR/EFF
Controls the balance of volume levels between
the direct signal and the Phaser signal: At a val-
ue of 0, only the direct signal is audible, at a val-
ue of 127, only the Phaser output signal is
audible. The values between these two ex-
tremes determine the mix of the two signals.
the direct signal and the Phaser signal: At a val-
ue of 0, only the direct signal is audible, at a val-
ue of 127, only the Phaser output signal is
audible. The values between these two ex-
tremes determine the mix of the two signals.
The pure phaser signal is generated by frequen-
cy-dependent phase shifting (PHASER Fre-
quency) and pitch modulation of the phaser’s
own LFOs (PHASER Rate and Depth). Not until
the direct or dry signal (PHASER Dir/Eff) is
mixed to the wet effects signal is the typical
phaser effect generated.
cy-dependent phase shifting (PHASER Fre-
quency) and pitch modulation of the phaser’s
own LFOs (PHASER Rate and Depth). Not until
the direct or dry signal (PHASER Dir/Eff) is
mixed to the wet effects signal is the typical
phaser effect generated.
FEEDBACK
Controls the amount of feedback in the Phaser.
On the phaser, FEEDBACK lets you boost spe-
cific frequencies in the phase-shifted signal.
The FEEDBACK parameter is bipolar; positive
or negative feedback values let you dial in dif-
ferent phaser characteristics.
On the phaser, FEEDBACK lets you boost spe-
cific frequencies in the phase-shifted signal.
The FEEDBACK parameter is bipolar; positive
or negative feedback values let you dial in dif-
ferent phaser characteristics.
PHASER (EDIT MENU)
RATE
Determines the speed of the Phaser LFO.
01111111111111111112
1 PHASER
Rate 36≤
Rate 36≤
61111111111111111154