Alcatel-Lucent OmniAccess 3500 Manuale Utente
Chapter 2. Initialization Tasks
A
DDRESS
P
OOL
Address pools are sets of IP addresses from which the gateway draws the pair of VPN
addresses that it assigns to the OmniAccess 3500 NLG card and associated laptop upon
establishment of the IPsec tunnel. The addresses for the card and for the laptop are
addresses that it assigns to the OmniAccess 3500 NLG card and associated laptop upon
establishment of the IPsec tunnel. The addresses for the card and for the laptop are
drawn from different, disjoint sets. Multiple sets can be assigned to the cards (Card
sets) and to the laptops (Laptop sets).
To add an address pool:
1. Click Gateway on the main menu and then click Configure Advanced Settings.
2. On the Configure menu, click Address Pool.
3. Click New. An Connection Manager Address Pool (Add) window appears (Figure
sets) and to the laptops (Laptop sets).
To add an address pool:
1. Click Gateway on the main menu and then click Configure Advanced Settings.
2. On the Configure menu, click Address Pool.
3. Click New. An Connection Manager Address Pool (Add) window appears (Figure
13), displaying the following fields:
o
IP Address: The base IP address for the definition of the IP address range from
which the OmniAccess 3500 NLG gateway draws the pair of VPN addresses.
o
Netmask (x.x.x.x): The netmask for the definition of the IP address range from
which the OmniAccess 3500 NLG gateway draws the pair of VPN addresses. The
Netmask value must be expressed as an IP address (e.g., <255.255.255.0>).
which the OmniAccess 3500 NLG gateway draws the pair of VPN addresses. The
Netmask value must be expressed as an IP address (e.g., <255.255.255.0>).
o
Type: The platform component that will receive the VPN addresses out of this
address pool. Select <Card> or <Laptop> from the drop-down menu.
address pool. Select <Card> or <Laptop> from the drop-down menu.
4. Click Save.
Figure 13 - Connection Manager Address Pool (Add)
17