Alcatel-Lucent OmniAccess 3500 Guida Utente

 

 

Installing the gateway requires two people. To prevent damage to components from 
electrostatic discharge, always follow the proper guidelines for equipment handling 

and storage.  
Caution: In order to reduce the static potential, any person installing, removing, or 
handling the gateway should be properly grounded through the use of an approved 
antistatic wrist strap. 

The following items are required at the installation site:  
•  Phillips screwdriver 
•  Three Cat6 Ethernet cables (long enough to run between the gateway and the 

target network outlets)  
Note: Additional cabling may be required for connectivity through a patch panel. 

•  A PC with an Ethernet port and a web browser 
•  The capability to execute the ktpass command on the Active Directory Server of 

the enterprise 

•  A certificate and associated private key file for the gateway 
•  A license file for the gateway 
•  The certificate of the issuing authority for the gateway certificate. 

The gateway has the following environmental and airflow requirements: 
•  The installation site must maintain at any time the operational temperature and 

the humidity levels listed in the Specification and Compliance Data section of this 

document. 

•  Adequate room for proper air ventilation must be allowed at the front, back, and 

sides of the appliance. No clearance is necessary at the top or bottom of the 
appliance. 

The gateway has the following general electrical requirements: 
•  One grounded electrical outlet must be available for the AC power supply of 

gateway.  

•  To connect the gateway to the grounded electrical outlet, use the supplied AC 

power cord. Do not use extension cords. 

Your gateway order includes the following items: 
•  OmniAccess 3500 NLG Gateway appliance 

 

 

7