Alcatel-Lucent OmniAccess 3500 Guida Utente
Chapter
4.
Installation
I
NSTALL
A
PPLIANCE IN
R
ACK
Caution: Lifting the appliance and attaching it to the rack is a two-person job. If
needed, use an appropriate lifting device.
1. Locate one person at the front of the rack and one at the rear.
2. Position the appliance so that the L brackets (Figure 14, A) are inserted into the
needed, use an appropriate lifting device.
1. Locate one person at the front of the rack and one at the rear.
2. Position the appliance so that the L brackets (Figure 14, A) are inserted into the
appliance mounting brackets (B).
3. While supporting the weight of the appliance, adjust the L brackets to fit tightly
into the appliance brackets (C).
Figure 14: L brackets inserted into appliance mounting bracket (front view)
4. Slide the appliance toward the front of the rack until the front of the appliance
mounting brackets contact the rear of the center posts.
5. Using the screws (Figure 15, C) supplied with your rack, attach the front of the
mounting brackets to the front of the center posts.
19