ascom office 10 Manuale Utente
8
ascom
Office 10
20316549en_ba_a0
Appliance functions
LED display
The handset is on-hook:
Setting the handset volume
You are making a call:
There are four volume levels.
Activating/deactivating the programming mode
To make the following settings you need to activate the programming
mode:
mode:
The handset is on-hook:
Now adjust the settings. Once you are finished, deactivate the pro-
gramming mode once again:
gramming mode once again:
The programming mode is activated:
Using the memory locations 0 to 9 (private directory)
Your telephone set has 10 memory locations, under which you can store
any call numbers or functions of your choice:
any call numbers or functions of your choice:
The programming mode (
) is activated:
LED lit:
•
•
A caller was unable to reach you and asks you to call
him back (
him back (
•
A subscriber used *38 to activate the LED (
LED flashing slowly:
Telephone is not logged in (
Telephone is not logged in (
LED flashing quickly:
Call pending (
Call pending (
Quieter.
Louder.
(Keep pressing the key until you hear an acknowledge-
ment tone.)
Louder.
(Keep pressing the key until you hear an acknowledge-
ment tone.)
1
2
ABC
You hear the idle tone (
You no longer hear the idle tone.
The programming mode is activated.
(Keep pressing the key until you hear the acknowledge-
ment tone.)
The programming mode is activated.
(Keep pressing the key until you hear the acknowledge-
ment tone.)
The programming mode is deactivated.
. . .
Select a memory location.
Key in the call number or function
of your choice.
of your choice.
or
Confirm the new setting and save.
The previous setting is retained.
0
9
WXYZ
☛
END
END