avolites pearl exper ttitan Manuale Utente
Copyright Avolites Limited 2010
3. Controlling dimmers and fixtures - Page 45
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
button will display a horizontal slider bar. You can then move your
finger left or right to change the value.
Active fixtures such as media servers will display a thumbnail of the
Active fixtures such as media servers will display a thumbnail of the
media clip in the button. The media server must support CITP and be
patched as an active fixture.
3.1.6
Setting attributes by number
You can directly enter a numeric value for the attributes which are
live on the wheels. You must be at the main Program menu to do this
(keep pressing Exit until the vertical menu bar shows “Program
Menu”).
Type a number on the numeric keypad then press
Type a number on the numeric keypad then press
softkey E or F to set the value to wheel A or B. The
Softkey legend will show what effect your value is
going to have (such as [Gobo 5], or [Deep Blue]). If
your value is invalid for that attribute, a warning
symbol is displayed as shown on the right.
For attributes displayed in percent, such as Dimmer, or Colour Mix,
For attributes displayed in percent, such as Dimmer, or Colour Mix,
you enter a value from 0-100 to set the percentage output. For
attributes where the output is divided up into ranges, such as colour
wheels, you enter the index of the range you want. For example to
select the 3rd colour (as displayed in the list above the wheel) you
would enter 3.
3.1.7
Selecting fixtures and dimmers by number (Channel)
In some situations, for example when programming lots of dimmers,
it can be easier to type in the dimmer channels you want to program.
The Channel menu allows you to do this for dimmers or fixtures. To
access the Channel menu, press the Channel button on the top left of
the numeric keypad.
Fixtures may be selected by User Number, Handle Number or DMX
Fixtures may be selected by User Number, Handle Number or DMX
Address, as set by the option on Softkey A.
When using the Channel menu it is helpful to latch it by pressing the
When using the Channel menu it is helpful to latch it by pressing the
ML Menu button.
•
To select a fixture, type the number and press Enter.
•
To select more than one fixture, press [And] between each
number. For example 1 And 2 And 5 Enter will select 1, 2, 5.
•
To select a range of fixtures, press [Through]. For example 1
Through 8 Enter will select 1-8.