avolites pearl exper ttitan Manual Do Utilizador

3. Controlling dimmers and fixtures  - Page 45

 

 

 

 

PearlExpertTitan_Man_v3.doc  29/03/2010 13:28:00 

button will display a horizontal slider bar. You can then move your 

finger left or right to change the value. 
Active fixtures such as media servers will display a thumbnail of the 

media clip in the button. The media server must support CITP and be 

patched as an active fixture. 

 

 

 

You can directly enter a numeric value for the attributes which are 

live on the wheels. You must be at the main Program menu to do this 

(keep pressing Exit until the vertical menu bar shows “Program 

Menu”).  
Type a number on the numeric keypad then press 

softkey E or F to set the value to wheel A or B. The 

Softkey legend will show what effect your value is 

going to have (such as [Gobo 5], or [Deep Blue]). If 

your value is invalid for that attribute, a warning 

symbol is displayed as shown on the right. 
For attributes displayed in percent, such as Dimmer, or Colour Mix, 

you enter a value from 0-100 to set the percentage output. For 

attributes where the output is divided up into ranges, such as colour 

wheels, you enter the index of the range you want. For example to 

select the 3rd colour (as displayed in the list above the wheel) you 

would enter 3. 

In some situations, for example when programming lots of dimmers, 

it can be easier to type in the dimmer channels you want to program. 

The Channel menu allows you to do this for dimmers or fixtures. To 

access the Channel menu, press the Channel button on the top left of 

the numeric keypad. 
Fixtures may be selected by User Number, Handle Number or DMX 

Address, as set by the option on Softkey A. 
When using the Channel menu it is helpful to latch it by pressing the 

ML Menu button. 

• 

To select a fixture, type the number and press Enter. 

• 

To select more than one fixture, press [And] between each 

number. For example 1 And 2 And 5 Enter will select 1, 2, 5. 

• 

To select a range of fixtures, press [Through]. For example 1 

Through 8 Enter will select 1-8.