ADC 500L Manuale Utente
Configuring PPP over ATM Sessions
PRELIMINARY
38
Megabit Modem 500L Installation Manual
PR
EL
IM
IN
A
RY
Defining User Assignment Parameters
Enter the IP address for the PC that is assigned to this session.
1
Do the following to define
Users’ Assignments:
2
Click
Add
to accept a user assignment you entered in
.
Delete a user assignment as follows:
1
Highlight the user assignment listed in
(see figure above) then click
Delete
. (When you
highlight the user assignment, it automatically displays in the
Service Name
and
User’s IP
Address
fields.)
2
After adding or deleting all user assignments, click
Done
to return to the
EasySession
page.
You can map your PC to only one of the three sessions at a time. If you want
to use a different session, select
to use a different session, select
User Assignment
on the
PPP over ATM WAN
Configuration
page and move the user assignment to another session
.
Enter the
Service Name
you entered for the session shown in field
on
.
Enter the
User’s IP Address
for the LAN-side user that you assign to this session.
(If the PC is mapped to one of the other two sessions, you must remove it from that
session to map it to this session.)
session to map it to this session.)
Displays the
Service Name
and
User’s IP Address
for the configured session.