ADC ETU-751C Manuale Utente
700-701-100-02
System
Configuration
UTU-701 and ETU-751 List 1
August 9, 2002
39
Configure LTU and NTU Interfaces
Select and configure the LTU- and NTU-related operating parameters as follows:
1
Type one of the following at the Config drop-down menu to display the Config LTU or NTU Interface menu:
•
for the Config LTU Interface menu (
).
•
for the Config NTU Interface menu (
).
Figure 22.
Config LTU Interface Menu
Figure 23.
Config NTU Interface Menu
The Data Rate/# of TSs and Beginning TS parameters in the Config LTU and NTU Interface
menus
menus
are read-only displays.
The Data Rate/# of TSs value is set in the Config System
Settings menu as the “HDSL Payload Rate” (See
). The Beginning TS
value is 0 with 32 time slots selected (unstructured mode) and 1 when less than 32 time slots
are selected (structured mode).
are selected (structured mode).
L
N