HP 2000 Manuale Utente
6.
Open the computer.
7.
Remove the two Phillips PM2.5×6.0 screws (1) that secure the power connector and bracket to
the computer.
the computer.
8.
Remove the power connector bracket (2).
9.
Remove the power connector (3).
Reverse this procedure to install the power connector cable.
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cable)
647315-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
), and then remove the following components:
●
Optical drive (see
●
Keyboard (see
)
●
Top cover (see
●
USB board (see
60
Chapter 4 Removal and replacement procedures